Voxelab Aquila&Similar框架双层丝料喂料导管

Voxelab Aquila&Similar frame dual filament feed guide with ziptie/cable/filament holder loop (Filament Feeder Friend)

2024-01-19 08:36:15

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

My First ever 3d model, excuse the side I had an incident during the print but figured id use it to show the infill.

I also havent printed the second spool holder so in one of the photos i hold the spool where it would be, anyway this device allows for holding/feeding of two filaments and has a hook to hold one filament when not in use or as a ziptie mount for easy swapping of filaments.

it lets You you to keep 2 spools ready to roll at one time or even better for people who have a dual extruder mod, personally I think it goes hand in hand and would say kinda inspired by this mod.

It works great and i feel some credit is due for the inspiration,
its called the direct drive mod (OOTBDD) as seen here
https://www.thingiverse.com/thing:5802023/makes

Only tested this on my aquila c2 with the OOTBDD but from what I can see it should fit other similar printers,

to install remove the 2 top bolts (pictured) holding the top of your frame off to slide clips in allowing you to fit onto the frame and then re attach the bolts, holder should slide right on in and will be a snug firm fit so it stays strong

Quick note: as mentioned there is a small hook/loop used for holding the filament this points down and so potentially takes a small ammount of space when making tall builds but we are talking from the top of the frame the hook/holder comes down about 11mm so it shouldn't be an issue realistically, that being said I havent yet tested an extremely tall print.

I also recomend cutting some bowden tube or similar loading tube to fit in the holes to a length of at most 29mm, its probably not required but makes for smoother loading/feeding during usage and a lot of printers often come with some spare so its free in most cases.

Print Settings

Printer:
Aquila C2
Rafts:
Yes
Supports:
Yes
Resolution:
.2
Infill:
35
Filament brand:
Any
Filament material:
PLA+
Notes:
Generate Support:
Yes
Type: tree with default settings
(see pictures as support blocker is required / was used during my final print)