皮卡汀尼式安装架（雷明顿M1888步枪专用）

Picatinny mount for Remington 1858

2023-06-22 20:19:40

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a picatinny mount for .44 cal Remington 1858 New Model Army from Pietta (I guess it suits all 1858's... except the sherif ones).

It will not prevent you from using the tamper nor loading/unloading the barrel.

Materials
4x M3*17mm screws (or 18 maybe ? actually, idk).
8x M3 inserts.

Print Settings

Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.16
Infill:
99%
Filament brand:
None
Filament color:
None
Filament material:
PLA / ABS / Nylon...
Notes:
Print left and right .stl files.

Make sure (find a way...) the assembly face is perfectly flat.
No warping.

Post-Printing

It might be too long. File it as less as possible.

For loading/unloading the barrel, you might need to sand ~0.1mm on the left side mount (on the top of the barrel)

You'll have to fit 4 inserts with soldering iron on each side. They must be perfectly aligned so you'll be able to assemble it.
You might want to use inserts only on 1 side to dodge this difficulty (the screw will hold the other side).

By the way, the holes for the inserts are too small. Pushing with soldering iron might stuck plastic in the inserts. Be carefull... Drill it bigger... idk.