Brodit专用适配器（25° /35° 角度）

Brodit adapters 25° /35° angle

2023-06-22 21:58:05

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Brodit ProClips (base for phone mount) are often placed on side, and the phone angle is not oriented to driver. Brodit offers tilt swivals, but only with limited angles. There are two adapters (with 25° and 35° angles), complementary to tilt swival #215200 allowing much higher angle and best phone orientation.
Recommended to use material other than PLA, which has poor temperature resistance (i.e. PETG, ABS or ASA) .
Can be used with any ProClip, Tilt swival (item 215200) and any phone holder (including 3D printed like on picture). The printed adapter replaces the base (lower) part of #215200.