太多骨头：Gearloc存储盒

Too Many Bones: Gearloc Storage Trays

2023-06-23 03:42:13

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

These are dice and chip storage trays for the Gearlocs in the board game Too Many Bones. Sliding lids for the trays are available in a separate posting (6090864). The lids are customized with each Gearloc name.

Skill dice slots are at alternating angles to make the dice easy to pick up individually. The outer dimensions of the trays are designed so that four fit in one of the expansion Gearloc boxes (see the accompanying photo) along with the Gearloc Reference Sheets. Only two Gearloc Mats fit; putting all four in raises the box lid up 1 cm from flush. Four trays with Reference Sheets and up to six Mats do fit conveniently in the 40 Days in Daelore box.

The trays come in four variants depending on how many chips should nest in the chip holder portion. Most Gearlocs have only one chip. The exceptions are:

2 Chips: Duster, Dart, Figment
3 Chips: Static (Estimated from promotional photos)
4 Chips: Lab Rats; Ghillie and Tink with the Ally Pack

Edited (12/30/23): Added a tray that holds 5 chips.

Print Settings

Printer brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
Yes
Resolution:
0.8 mm
Infill:
20%
Filament brand:
eSun
Filament color:
Gray, Blue, Orange, Yellow, Fire Engine Red, Black
Filament material:
PLA+
Notes:
Tray colors were chosen to match the characteristic color of each Gearloc. Using filament swaps, a thin middle layer of black was put down in order to visually offset the dice from the tray itself.

Support was needed around the rim of the tray.