艾伦与希斯 SQ 扩展卡持有器
Allen & Heath SQ expansion card holder
2023-06-23 03:58:37
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is my first take on a holder for A&H's SQ series expansion cards.
I haven't actually printed this yet so please let me know if it needs tweaking.
The screw holes are 2.5mm in diameter, 4-40 machine screws fit nicely.
Version 1.2: Widened the box by 2mm, screw holes remained in the same place. Widened the distance between the screw hole mounts because the Dante card didn't fit between them.
Print Settings
- Printer brand:
Creality
- Printer:
CR10S PRO
- Rafts:No
- Supports:No
- Resolution:.2
- Infill:100
- Filament brand:
Overture
- Filament material:
PLA
- Notes:
You shouldn't need any supports if you print it on it's back.
License
CC BY-NC
Allen & Heath SQ expansion card holder
by bwragg is licensed under the Creative Commons - Attribution - Non-Commercial license.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
热门推荐
-
Na Miata 240SX 原厂经典车型 + 后灯装饰插件2023-05-10 -
WaS_UK_N-class_destroyer2023-05-17 -
Dew Shield for Evoguide 50ED2023-08-07 -
自行车钥匙扣2024-01-05 -
Arduino继电器模块外壳2024-01-14
最热下载
-
车身RC 1/10 全套2023-03-26 -
Extra 330LX型RC飞机翼固定架（Multiplex）2023-05-23 -
数字世界12342024-01-03 -
佳能EOS镜头连接接口2024-01-11 -
GTA 5 大地图模型2024-04-21
最新模型
-
丰田22RE发动机Starer电机2025-08-08 -
鞋带锁2025-07-17 -
系带3D凉鞋（儿童款）2025-07-16 -
私密羞羞娱乐骰子2025-07-15
