3dsjs

可安装式艾伦键持有装置

ALLEN KEY MOUNTABLE HOLDER

2024-01-09 05:26:20

使用说明

  1. 所有模型资源均由用户上传分享,内容来源于网络公开资源
  2. 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
  3. 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用

我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!

扫码手机访问
抖音私信 @jobsfan

Summary

This was designed to organize the set of Allen Keys that commonly come with 3D Printers.

The hole sizing was measured from the set that come with the Creality Ender 5 Plus which tends to have fractionally smaller dimensions than some others from hardware stores. To accommodate different manufacturing tolerances and/or personal preferences for fit, three different hole clearance fits are provided: Snug, Loose, Very Loose.

The snug option can be loosed/worn out to any desired fit if necessary as it should be the minimum end of the fit range.

The holder mount has 5 holes, recommending use only 2, but you have varying distances to match different rails. Each hole is spaced 10mm apart.

For mounting to a standard 2020 extrusion, I used M3 x 8mm screws, but I believe M3 x 6mm would work as well.

3D PRINTING SETTINGS

holder and mount print separately
no supports
You can use whatever defaults you prefer for settings, but the sample images uses these:
0.2 mm layer height
0.4mm layer width
3 walls, 4 top/bottom layers
12% cubic infill
80 mm/s excepting 20 mm/s outer walls

This model is 100% free. If you like this model and would like to support me, consider sending a tip to the PayPal account in my profile or consider buying one of my paid models on Cults3d (account: F412)

License

CC BY

ALLEN KEY MOUNTABLE HOLDER
by f412 is licensed under the Creative Commons - Attribution license.

可安装式艾伦键持有装置
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15

相关内容

猜你喜欢