SM抽屉系统：基座设计附加部分及末端盖

SM_Drawers/Base_DesignAttachment and endcaps

2023-06-23 06:45:31

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

SM抽屉系统：基座设计附加部分及末端盖

SM抽屉系统：基座设计附加部分及末端盖

Summary

SM_Drawers/Base_DesignAttachment redesigned and endcaps

as Steve3ds said Such a great design but such a shame about the connectors that don’t fit! If someone could redesign this with better connectors it would be incredible

this is my attempt to the request

3mm screws, greater than or equal 16mm long, and 3mm nuts

use screw to pull nut into base attachments
assemble 4 bases in 2 pairs with base attachment half, and front endcap half
then put the base attachment in the middle of the pairs using a rod
then screw in the base attachment endcap

see f3d, and step file for assembly or modification

Print Settings

Printer brand:
ELEGOO
Printer:
ELEGOO NEPTUNE 3 Pro
Rafts:
No
Supports:
No
Infill:
20% Lightning
Notes:
4mm brim
let print cool before removing brim
increase feedrate to lower print time

Post-Printing

use a rod to push the base attachment so you can screw into it

use f3d or step dile for assembly

How I Designed This

fusion 360

License

CC BY

SM_Drawers/Base_DesignAttachment and endcaps
by anttho is licensed under the Creative Commons - Attribution license.

SM抽屉系统：基座设计附加部分及末端盖

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

德士泰纳1887型机械操作温彻斯特式步枪模型
2023-03-26
6S Tattu V.5 1200 Battery Holder
2023-08-08
乒乓球无气
2024-04-22
伪通用印制电路板 3D 模型
2024-04-28
Daisy小雏菊开花装饰
2025-06-26

最热下载

最新模型