3D可连接式板

PeggedBoard

2023-06-23 09:16:26

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

My WIP version of a 3d print friendly peg board alternative. It uses screw-in pegs with tapered heads and slots in the attachments.
The pegs are spaced 25mm apart using #8 or #6 countersunk wood screws at least 1/2" long or any screw that sticks out from the peg less then 1mm.

Update v1.1 - Double Standards:
Added pegs for standard 3/16” pegboard with 1” spacing that presses in and lock with a M3x10mm countersunk screw and redesigned the hangers to a 25.2mm slot spacing to fit better on both. I also added a keyhole hanger that can be printed in any (basic) orientation. The basic peg is unchanged and the original hangers will fit on a 1” spacing as they were designed with a good bit of tolerance on the peg position, the redesign is to equalize the stacked position error on wider (5-6+) hangers. The redesign also allowed me to split the pegs and different width hangers into separate files that can be “saved as” for new holders.

STLs included so far:
Pegs:

Basic Peg
Long peg - Extra .5mm peg length for easy slip fits.
1x2 Pegs - Add a quick hanger anywhere
3x5 Pegs - A mini PeggedBoard with 3 rows of 5 pegs 50 mm apart
v1.1:
push-in screw lock peg 0.25” and 0.27”

Mounts:

2w & 3w blanks
2 square hooks (width x opening)
Small hammer holder
Screwdriver holders with holes
Screwdriver holders with slots and counterbores (width - c-bore dia. x c-bore depth/type)
6x small screwdriver holder
Paper towel roll holder 40mm dia.
2x2 Gridfinity baseplate
New(v1.1):
v1.0:
1w Mini screwdriver holder with slot and counterbore (width - c-bore dia. x c-bore depth/type)
Black & Decker cordless drill / 1.5AH Max20V battery holder
v1.1:
2w & 3w slotted hanger blanks
2w & 3w keyhole hanger blanks
Screwdriver holders with slots and counterbores (width - c-bore dia. x c-bore depth/type)

STEP files, a drawing of the peg and groove, and F360 archive are included for making your own holders. v1.1 new F360 archive files for the peg, hangers, and screwdriver holder.

Enjoy