物品卡的携带者

Item Card Holder for Gloomhaven, Frosthaven, Jaws of the Lion, and more!

2023-06-23 19:08:34

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Back Story:
I couldn't find a card holder which fit my needs, so I decided to alter this one (the designer did a great job, it just wasn't designed with tiny Gloomhaven item cards in mind :P). I already have a nice set of wooden card holders, but they were designed for full size playing cards, and without consideration for what may be behind the holder (they are quite tall), so I took a few things into consideration when making this especially for Gloomhaven/Frosthaven/etc.

Design Notes:
I wanted it to...

be as low profile as possible while still securely holding the cards (so it doesn't block the play area).
tilt backwards slightly, so that the cards are easily visible, regardless of seating height/eye-line.
have a lower front lip, so that the cards slide in easily, but also so that the front lip doesn't cover the spent/consumed icon.
take up as little space as possible, while still maintaining stability (reducing and restyling the base "feet".

Printing:
I didn't want to decrease the size, as it fit nicely with our wooden dashboards, so I had to angle it quite a bit to print on my Anycubic M3 Plus (I sliced it with Lychee and it printed perfectly). i included a supported file, mainly just as a reference for those with a similar size resin printer. Im sure it would print with less supports, but as this was a somewhat long print, I wanted to make sure it didn't fail part way through. I assume it would print flat on the build plate and without supports (resin or FDM), as long as you have a big enough print bed. At the current size, it fits 6 item cards without overlapping/blocking text. If you don't mind overlapping cards, it would fit a few more.