遥控飞行器翼保护罩（适用于X8型号发射台）
RC Wing Protectors for X8-style Catapult
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Here is a simple trailing-edge protector for flying wings using the X8-style catapult with the wing carrier.
A commercial version of this fantastic, hand-saving catapult is available from Impact UAS at https://impactuas.com/products/rc-plane-x8-catapult-launcher-9f0aecf5-c232-4b2a-9dcb-7a79a238f792
I used hot glue to attach to the trailing edge of my AR Wing Pro and E-Flite Opterra. I cut a slot in the protector with a Dremel tool to accommodate the servo horn on the AR Wing Pro. The fiber tape visible in the AR Wing Pro photos is from an earlier repair that catalyzed the creation of this thing.
Fair winds and happy flying!
Print Settings
- Printer brand:
Prusa
- Printer:
I3 MK3S
- Rafts:No
- Supports:No
- Resolution:0.2
- Infill:50%
- Filament brand:
Overture
- Filament color:
Orange
- Filament material:
PLA
License
RC Wing Protectors for X8-style Catapult
by halifax57 is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
热门推荐
-
带凹槽大衣挂钩2023-03-29 -
丰田RAV4车门座椅夹板螺栓更换2024-04-20 -
H0比例尺的门信号桥接器2024-04-21 -
乒乓球无气2024-04-22
最热下载
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
凯弗·鬼魂追踪者2024-01-18 -
花环戒指2024-05-08 -
中指2025-05-17
最新模型
-
自行车电池计量架2024-05-08 -
3D美国国旗模型2024-05-08 -
SkiErg表盘固定架2024-05-06 -
Makita DDF484钻孔架 / 钻孔机支撑架2024-05-06 -
T 型支撑结构适配器2024-05-06