Vector Optics Omega 8 lens protector

2024-05-08 01:42:47

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Someone I knew who owned an Omega reflex sight from Vector Optics had some trouble protecting his lens for airsoft use. I made him this model to use. It'll easily clip onto the optic itself and requires a 4MM thick PolyCarbonate sheet insert.

The files I've provided include a shape that can be traced for cutting a P-C sheet into shape for use.

I hope these files will be of use to someone. :)

Print Settings

Printer brand:
Prusa
Printer:
i3 MK4
Rafts:
No
Supports:
Yes
Resolution:
as high as you can go
Infill:
preferred 100% for strenth
Notes:
Try using a fillament that you know will stand up to airsoft bb impacts. Perhaps a softer and less brittle material is best.

Post-Printing

After printing all you need to do is make sure you own a sheet of clear polycarbonate at 4mm thickness. Use the lens shape that's in the provided files as example for the lens you need to cut out of the polycarbonate sheet. After cutting the shape out all you have to do is simply insert it into the slot before snapping the entire lens protection unit onto the optic. First slide the three arms over the top of the sight and then snap the bottom lip over the bottom front. To take it off slightly bend out the three arms and simply lift it off.