安科极寒霜轮子阻止器

Anker EverFrost Wheel Stopper

2024-01-06 19:05:24

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is the first version of a simple, custom wheel stopper STL file for the Anker EverFrost cooler created with TinkerCad.

I used TPU to print it (since I wanted a slightly flexible stopper), using the default AnkerMake M5 TPU settings (in AnkerMake Slicer): 0.2 mm layer height, print speed 50 mm/s, wall speed 30 mm/s, print temp 230 deg C, print temp initial layer 240 deg C, build plate temp 60 deg C). I set infill to 30%, although one can vary this parameter to obtain more or less flexibility. The print time for those settings above is about 8 hours 24 minutes for one stopper. I normally print a skirt with a line count of 3 and a distance of 5mm.

Although the flexibility of the TPU material might already slow down or prevent movements of the EverFrost wheels, you might want to consider using e.g. self adhesive velcro tape or any other adhesive tape to fix it inside e.g. of your car or somewhere else.

If you want a stiffer version of that stopper, feel free to use PLA(+) or PETG, although PLA might not be that robust if exposed to higher temperatures (e.g. inside a vehicle).