Wyze 无绳真空轮子

Wyze coordless vacuum wheel

2024-05-05 05:10:01

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a replacement wheel for the Wyze cordless vacuum. The small roller wheels on the front of the vacuum head wear out or break resulting in the opening to the brush bar sitting flush and suctioning flat against the floor making the vacuum unable to suck up crumbs and debris. These replacement wheels raise the head of the vacuum creating the necessary gap to effectively vacuum.

The wheel center hub diameter is designed slightly over 2mm to help ensure the wheel will freely spin around the axle.

If the small metal axle is missing from your vacuum along with the wheel you can simply use any 2mm diameter metal rod that is 12mm long. Cutting a small finish nail or large paper clip will likely work as long as it can be used to create a 2mm x 12mm straight piece. It is recommended to file any cut metal ends to a round taper at least on one end to help push the axle through the printed wheel.