WYZE CAM 20度角窗户安装支架（V3 & V4）

WYZE CAM (V3 & V4) 20° Window Mount

2024-04-08 07:48:55

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Concept
A window mount for WYZE CAM V3 and V4 (Standard and Pro models supported)

Usage
You will need to print:

[1x] WYZE Cam V3 20 Angled Window Mount
[1x] WYZE Cam V3 20 Angled Window Mount Cap

You will also need at least 2 small strips of double side tape for sticking the mount onto the window (optional if using the camera's built-in stand).

To use: Pull out the camera stand slightly and slide the camera into the mount depending on what angle you want (20° up/down or left/right). Notice that there are only two ways you can fit the camera in, you can flip the camera's view in the WYZE app. Put the cap on first, and then connect power.

Updates
2024.04.07 - Initial release. NEW: WYZE Cam V3 20 Angled Window Mount v10, WYZE Cam V3 20 Angled Window Mount Cap v3

History
I was requested to make a window mount after seeing the cost for one from Amazon (such as this one: https://www.amazon.com/dp/B0C4H6XNVW).

My Print Settings
Printer Brand: Creality
Printer: Ender 3 Pro
Rafts: No
Supports: Check part instructions
Resolution: 0.12 ~ 0.28
Infill: 15% ~ 100%
Filament: SUNLU PLA Black

Notes
WYZE Cam V3 20 Angled Window Mount - Print with the "window" flat on the bottom. Supports are required.
WYZE Cam V3 20 Angled Window Mount Cap - Print with the flat side on the bottom. Supports are optional.

The filenames are misleading, as it was originally designed for just the V3, but all V3 and V4 cameras can work.