Wyze智能门铃-安全安装
Wyze Doorbell - Secure Mount
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Original Doorbell camera as supplied is very easy to pop off the mount and steal, unfortunately, this is happening to often these days.. so this box was to make it take a bit of work.. hopefully deterring most.
Its designed so the front of the case is on the bed for printing.. and the rear bracket is printed wit screw tapers upwards.
I used #6 Screws front and back - 1" on rear
Print Settings
- Printer brand:
Prusa
- Printer:
I3 MK3S
- Rafts:No
- Supports:No
- Resolution:0.2 and 0.3
- Infill:whatever
- Filament brand:
your choice
- Filament material:
I used PETG
- Notes:
I printed with 0.6mm nozzle, and for first 5mm on body used 0.2 then switched to 0.3
The back plate I used 0.25 layers - printed on same plate and machine with 0.6mm Nozzle
I always use 4 outlines for more strength.
Post-Printing
Two things I did.. #1 I always use a counter sink tool to clean counter sinks and the area where the press button is on the inside there was a tiny lip.. I had to remove that or the button was pushed all the time.
Tags
License
Wyze Doorbell - Secure Mount
by Bo1o1o1 is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license.
相关内容
联系我们
热门推荐
-
Cyborg Beast2023-03-26 -
分形手玩星2023-03-26 -
时尚的Landroid轮子2023-09-08 -
未来之光：3D模型启航2024-04-23 -
Skynetic快速发动机支架2024-05-03
最热下载
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
尿不湿收纳盒，尿布收纳盒2024-01-07 -
Ikea 米兹顿 插嵌2024-04-20 -
F1赛船3D模型固定文件2024-05-08
最新模型
-
团队精神骷髅标志展示架2024-05-08 -
第一人称标记：戈宾诺的冒险2024-05-08 -
啤酒盛放器2024-05-08 -
肯纳经典版阿托-德托星球大战模型2024-05-06 -
MK2 扬声器保护罩2024-05-06