Apple Vision Pro磁吸充电盒3D模型

Apple Vision Pro MagSafe Charging case

2024-04-18 18:48:23

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I've managed to design a 3D printed mount that houses a MagSafe ring and a wireless charge receiver on the AVP battery pack. It works well to slow charge the battery overnight when it's not in use. I'd love to get some feedback on this and further improvements. I've added links to the ring, receiver and 3D model.

It uses the ESR HaloLock ring: https://a.co/d/igncFv3

And the wireless charge receiver: https://www.amazon.com/dp/B0838862WM?ref_=cm_sw_r_cp_ud_dp_R0WRN8SHZKHKEJM2DGRG

Overall thickness is 2 mm in the thickest parts and 0.2mm at the thinnest.

Areas of improvement:

finding a compact usb c splitter that would prevent the need to unplug the wireless receiver if you want to directly plug it in.
the if there is a defect in the print, it may affect the tolerances. A quick fix is adding a layer of tape on the inner surfaces of the sides to increase the friction, preventing the housing from sliding around.
due to limitations of my current 3D printer I wasn't able to design a holder that fits the battery entirely.