猪洞游戏:'猪小洞'与'坑里的小猪'
Spiel: "Pig-Hole" oder "Schweinchen in der Grube"
使用说明
- 所有模型资源均由用户上传分享,内容来源于网络公开资源
- 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
- 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用
我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!
扫码手机访问
抖音私信 @jobsfanSummary
Ein Schweinchenspiel zum selber drucken. Im Gegensatz zum Original ist die äußere Form pentagonal. Die fünfeckigen Teile sind aber recht groß für einen Ender 3 Pro…passt aber wenn man den digitalen Homunkel vorab im PrusaSlicer richtig positioniert. Beide Teile können bei Platzproblemen getrost um schätzungsweise 5-10% skaliert werden.
Deckel & Box sind neue Teile konstruiert in Solid Edge. Das Wutzchen ist ein skalierter Remix: https://www.printables.com/de/model/464448-piggy
Spielablauf: Die 60 Schweinchen werden gleichmäßig an die Mitspieler verteilt. In der 1. Runde hat jeder Spieler einen Wurf, in der 2. Runde 2 Würfe. Ab der dritten Runde kann jeder Spieler so oft würfeln, wie er möchte. Bei jedem Wurf muss ein Schweinchen auf das betreffende Zahlenfeld gesetzt werden. Trifft ein Spieler auf ein besetztes Zahlenfeld, muss er alle Schweinchen, die sich auf dem Spielfeld befinden, an sich nehmen und der nächste Spieler ist an der Reihe. Würfelt ein Spieler eine "6", darf er ein Schweinchen durch das Loch in der Mitte des Spielfeldes werfen. Gewonnen hat, wer als Erster keine Schweinchen mehr hat.
A piggy game to print yourself. In contrast to the original, the outer shape is pentagonal. The pentagonal parts are quite big for an Ender 3 Pro... but it fits if you position the digital homuncle correctly in PrusaSlicer beforehand. Both parts can safely be scaled by an estimated 5-10% if space is a problem. Lid & Box are new parts designed in Solid Edge. The Wutzchen is a scaled remix: https://www.printables.com/de/model/464448-piggy
Gameplay: The 60 little pigs are distributed evenly among the players. In the 1st round each player has one throw, in the 2nd round 2 throws. From the third round, each player can roll the dice as many times as they want. With each throw, a piggy must be placed on the corresponding number field. If a player encounters an occupied number field, he must take all the piglets that are on the field and it is the next player's turn. If a player rolls a "6", he may throw a piggy through the hole in the middle of the board. The first person to run out of pigs wins.
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3 Pro
- Rafts:No
- Supports:No
- Resolution:0.24 / 0.5mm Nozzle
- Infill:15%
- Filament brand:
Sunlu
- Filament color:
green / black
- Filament material:
PLA+
Tags
License
Spiel: "Pig-Hole" oder "Schweinchen in der Grube"
by HerrTheiss is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
猜你喜欢
联系我们
最新模型
-
TF2守卫Mr.Skin 3D模型2024-05-08
-
1:10比例汽车排气管模型2024-05-06
-
SkiErg表盘固定架2024-05-06
-
RC球杆末端压缩机2024-05-06
-
6X9英寸音箱间隔件2024-05-06
最热下载
-
红眼鳄鱼蜥蜴可拼合骨架3D模型2023-03-26
-
原始控制舱2024-03-25
-
Makergear M3 M2喷嘴标签2024-03-27
-
沙箱建筑模型2024-05-08