Elegoo Saturn 2 滴水臂（FDM）

Elegoo Saturn 2 Drip Arm - FDM

2023-06-24 00:00:01

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Remix of LumberZvch's Saturn 2 drip arm. I just filled in the hollow hanging arm so it will print faster on FDM printers. With my settings it was an hour faster filled than with that part hollow. (15% gyroid infill) Prints flat on build plate. I added supports for the little arches but that probably wasn't even necessary.

3D modeling novice, so this was filled using Prusa slicer's "add part". I couldn't figure out how to merge it all to look like one part when viewing the STL (so as-is you can see the two separate boxes when viewing in windows 3D viewer), but the slicer treats it all as one and sliced/printed the way I wanted.

It is snug on the Saturn 2, but definitely fit as described in the original model and doesn't cause resin to drip past the vat.

For resin printing, use one of the original models, not this remix.