Garden Stake Caps

2023-06-24 05:06:16

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This a cap for the top of garden stakes. These are useful for a couple of reasons. When using stakes to support plant netting the stake will sometimes rip through the netting. Another reason is to protect the gardener from poking their eye (this happens, ask my wife).

The stl file is a cap with a 1.5 inch diameter and a 0.5 inch hole for the pole. The idea is for you to measure the pole diameter and then scale the x y and z appropriately in the slicer. For example if your pole has a 0.4 inch diameter, in your slicer, scale x y and z by 80% (0.4/0.5 = 80%). Its not absolutely necessary to scale z but the shape will change if you don't - not a big deal
.
I printed this with TPU so it can fit the stake tightly. TPU also makes a nice soft surface.