海上霸王

Naval Battle

2023-06-24 06:14:35

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

It's a blast to play this game with the whole family, and it's definitely one of our favorites. We had a printed version, but it had a couple of issues for me. The pegs were too small and delicate, and there was no locking mechanism for the cover.

That's when I decided to take matters into my own hands and design my own version.

I've created three different styles of covers and multiple ship designs. Print out the ones that tickle your fancy the most.

Here's a little tip: if the peg doesn't fit smoothly into a hole, don't force it. It can be a pain to remove later. Check if you need to adjust the outer X-Y compensation on your printer and then print a batch of pegs.

I recommend printing:

Around 80 "Water" Pegs.
And then the number of 35 "Fired/Ship on Fire" Pegs. (The larger fire peg is for the top board, while the smaller one is for our ships when they're hot.)

The hinges are specifically designed to be used with filament. Simply insert the filament into the holes, cut it to the desired size, and add a drop of glue to both ends. It's a straightforward, simple and efficient solution.

Get ready for some friendly competition and enjoy the game!

Print Settings:
Material: PLA
Layer Height: 0.2
Infill: 15%
Walls: 3
Supports: No
Brim: No
Raft: No
Supports: No
Change filament during print: Yes, make your own color schemes :)

Enjoy. If you have any questions or suggestions, hit me up in the comments. And if you wanna support me, give it a like, download it, and share it with your friends. Happy printing!