装甲战车霸王级2023

PanzerWolf 2023

2023-07-22 11:10:22

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This wearable mask is for the Panzerwolves in the Swedish LARP "Blodsband Reloaded".

The mask is made to be worn so that you look out through the mouth - this to have a better field of view than previous masks where you had to look out through the eyes.There should be room enough to fit tighter security glasses inside.

The mask is made to have fur added to it to fill in the rest of the face and back of the head. Alternatively you can attach a hoodie to the sides of it.

The jaw snaps on and has some range of motion. There are some holes on the inside that you might try to attach some string if you want it to be articulated.

Files are for a 60 cm head circumference.

Print Settings

Printer brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
Gyroid. 20%
Notes:
I printed mine in PLA, 0.2 mm layer height, 3 shells, gyroid - I hope these will let it survive the airsoft bullets of the LARP (untested!). There are probably better materials such as ASA.

The files are positioned as I printed them, sizing are for a 60 cm head circumference.

There might be open edges etc. I will not fix any mesh errors before the LARP 2023 - It slices and prints fine using Prusaslicer.

Let me know how this one prints and works for you, I have NOT tested this yet at the LARP so we will see if any upgrades will be added once it has seen combat.