TT-60动力装甲头盔修复版
TT-60 Power Armor Helmet 'fixed'
2024-04-24 18:25:24
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
After trying to print each piece from this remixed remix, I realized that most were out of manifold or had messed up meshes. I ran these pieces through mesh mixer to get them to a printable state. I will continue to add more as I get through printing them. Continue to print everything else from the original remix found below. Make sure you sit the piece flat to the bed! They both only need moved slightly to be sitting flat. If using Cura you can select rotate then the second icon which is lay flat and Cura will do it for you.
Print Settings
- Printer:
Bluemaker
- Rafts:No
- Supports:Yes
- Infill:20
- Filament brand:
Any
- Filament material:
Pla
- Notes:
Make sure you support overhangs for best results
Tags
TT-60动力装甲头盔修复版朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
热门推荐
-
花盆幼苗起始套装 60毫米2024-01-13 -
快乐之城：Grozilla插入模型2024-01-17 -
3D聚乙烯贴纸2024-04-05 -
3D模型: Lula2024-04-07 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21
最热下载
-
GPD Win3 把手型号2023-04-07 -
GMX曲线支架支持GoPro安装（或轻型结构）2023-05-22 -
欧宝Zafira B倒挡锁止机构（倒挡防误入装置）2024-04-02 -
篝火（Bonfire）收纳盒 / 插槽整理架（含扩展包）2024-04-12 -
适用于ebyte E104-BT5040U USB适配器的外壳2024-04-28
最新模型
-
Myuto Flick 19X - 可工作的玩具枪（橡皮筋弹弓状枪）2025-08-17 -
任意立方体活动关节的一体打印外星人2025-07-19 -
弹弓HGX-FRAME V1A2025-07-18 -
鞋撑2025-07-17 -
比基尼模型2025-07-16