9毫米有轴弹药箱

9mm hinged ammo box

2023-06-24 06:14:56

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

50 round 9mm hinged ammo box.

To connect the top to the bottom, just press down firmly until the pieces lock together. I suggest doing this before loading any ammo into the bottom, since it can tilt and block the lid from latching together. This step is temperamental and, although I've verified multiple times that it works, I have had a break happen here when the print had a notable layer shift which weakened the hinge. Damage is a rare, but real possibility.

For the exact size, I had inconsistent results using different spools of PLA, so this scale was intended to be a comfortable middle ground. Depending on your exact material and print settings, it might be either too tight, or not tight enough. If the size isn't what you want, I'd recommend sticking to a scale of 98% to 103%, as those fit snuggly for every print I tried.

15% infill is sufficient for this. For the front latch on the top section, I recommend setting the infill of just that area to 100% to make it more durable, although it will work without that; it just won't stand up to much abuse.