铅制通用弹药箱 LeadBed

LeadBed - Universal Ammo Box

2024-03-20 15:44:14

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Currently supported calibers:

.22LR
9mm Luger
.45 ACP
.380 ACP
5.56 NATO
7.62x39mm
.308 Win

This list will expand over time - leave a comment and I’ll be sure to include all requests in the next build.

What in tarnation is a LeadBed?

LeadBed is a parametrically-designed, Gridfinity-compatible*, stackable, multi-caliber ammo box system.

The goals of this project were to create an ammo box solution that:

covers all of your calibers in one design
covers all needed box sizes in one design
takes up as minimal filament / space as possible
is rigid and secure enough to throw in a range bag
stacks and arranges cleanly
printable without supports
caliber is clear from all viewing angles
fully 3D printed - no screws, nuts, or magnets needed
Gridfinity-compatible*

Ok Mr. Fancy Pants, how do I make this thing?

1.  Download and extract zip file for your desired caliber
2.  Subfolders are organized by grid dimensions. (If you have crippling option paralysis, my favorite is 4x2)
3.  Using settings listed below, print one of each: Box.stl, Lid.stl, Holder.stl
4.  Insert holder into box, keeping holder parallel to floor, until all four corners rest on box support beams
5.  Slide lid fully into slot at top of box
6.  Done. Fill with your ammo of choice and enjoy your secure pew pew storage.

Hold on there, partner - why the asterisks by "Gridfinity-compatible"?

All Gridfinity-compatible components in this model are designed by hand from scratch, and are not the work of Zack Freedman nor subject to licensure. The base plates are to spec and should be compatible with any other prints. The stackable lid dimensions are to spec, but due to lid design, only encompass one large grid rectangle. 4 squares will fit on top of one 4x1, but 1 square would slide along its length. In an effort to save print time and filament/improve rigidity, height is not standardized to increments of 7mm.
If there is interest in a full-fledged version, leave a comment and I can do so in future iterations.

Changelog:

v1.0.0, 3/20/24 - initial release

Well gee golly Mr. DSB, this is darn tootin’ based, how can I say thank you?

Leave a like and comment! Post build pics! That’s it. If you really feel so inclined, my Patreon is linked, but I’ll be happy just knowing my design is out there tucking in some lead to sweet, sweet dreamland.