QCX/QMX系列连接器与PowerPole接口适配器

QCX/QMX to PowerPole Adapter

2023-06-24 11:00:54

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This little adapter holds a power pole and a 90 degree 5 x 2.1 mm DC power cable. I used Digikey part number 839-1377-ND. Each cable will make two adapters. You will also need 2 M2.5 x 14 mm screws and one M2.5 x 5 mm screw. I am including the Fusion 360 file if you want to modify it. I left a parameter table that allows you to change the depth of the connector and a couple of other things. Simply insert the cable into the radio and measure the protrusion. Enter that into the parameter table and it will adjust the dimensions to fit. Be sure to specify in or mm.

This could be more easily printed in PLA but PET-G is more durable. It is important that the layer height is .12 mm or the "Bottom_Thickness" is changed to be 4 layers. The walls are set to be 2 layers from a .4mm nozzle.

NOTE: The model prints best if you flip it 180 degrees and have the outside down. (Sorry, that is not how I drew it.)

Print Settings

Printer brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
.12
Infill:
50%
Filament brand:
Any
Filament material:
PET-G
Notes:
You can play with your Z retraction setting to deal with stringing in PET-G.