RPi4八足山羊座架搭载防护散热器与SSD

Octopi mount for RPi4 with Armor Heatsink and SSD

2023-06-24 15:52:21

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

SSD's are much more reliable and much faster than SD Cards, so I boot my Raspberry Pi 4 running OctoPrint from a small SSD. As I couldn't find a suitable mount that incorporated an SSD, I decided to use it as a learning experience and design my own in Fusion 360.

As I also run a passive "Armor" heatsink, I designed the mount to completely replace the bottom plate and utilise the existing screws. You will need some screws for the SSD though.

The resulting model isn't perfect, but it works. I have included the the Fusion 360 source file if you wish to modify it to suit your needs.