巴巴索尔 510 型号容器持有器

Barbasol Can 510 Cartridge Holder

2023-06-25 05:42:41

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Barbasol Can 510 cartridge holder inspired by Jurassic Park.

Version 1: Kind Pen Mist + 3 cartridge slots
-KP - Base.stl
-KP - Middle.stl
-KP - Top.stl
-KP - Pin.stl
-Optional - Cartridge Lift.stl
-Optional - KP Lift.stl

Version 2: 5 cartridge slots + 1 slot for taller pen
-TP - Base.stl
-TP - Middle.stl
-TP - Top.stl
-TP - Pin.stl
-Optional - Cartridge Lift.stl

Barbasol Can Insert:
-Can - Base Insert.stl
-Can - Surround.stl

PLEASE NOTE

-I've included two versions, both of which can be removed and used without the can.

-Holders alone measure 1.75" diameter by ~2" tall.

-The pins are a little extra long in case you need to adjust, so you'll need to cut them down to size.

-The pins will go through the stands to help keep it lined up, but you'll want to superglue it together for the final piece.

-The optional cartridge inserts will fit into the slots loosely to lift the cartridges up or allow a 6th cartridge instead of a tall pen in version 2.

-The optional insert for the Kind Pen will lift the Mist high enough for the micro USB charge port to be accessible.

-This is for 10.6mm cartridges and the slots are relatively tight to keep them from sliding around in the can while it's sealed.

-The can I used was purchased here: https://www.vat19.com/item/can-safe-distraction-safes

Print Settings

Printer brand:
Creality
Printer:
Ender-3 v2
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
25
Notes:
If you're printing with filament that has a gradient, use this order:
-Surround
-Base
-Middle
-Top