Tronxy X5SA系列直接驱动混搭版

Tronxy X5SA Series Direct drive remix

2023-06-25 17:36:54

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Tronxy X5SA系列直接驱动混搭版

Tronxy X5SA系列直接驱动混搭版

Summary

The original design i found was pretty good, but it didnt quite fit my X5SA-2E. the cable chain mounts are not remixed only the main bracket for direct drive. I added longer tabs to the bottom which replaces the stock spacers in the hotend carriage and adds a bit more stability. I also added a motor mount bracket not included in the original. this bracket acomidates a 42x23 stepper motor and also moves the extruder 2mm foward so the pneumatic coupler for the ptfe tube is not right against the main assembly and allows more clearance on the extruder tension screw

Print Settings

Printer:
Any
Rafts:
No
Supports:
Yes
Infill:
75
Filament brand:
Any
Filament color:
Any
Filament material:
PETG
Notes:
I used tree supports in some places, use supports of choice how your printer needs them. I set wall count to 10 and top and bottom to 12 for the main pieces. on the stepper motor bracket i used 9 walls and 10 top and bottom with 60% infill

Tags

direct drive dmills mount remix TRONXY X5SA

License

CC BY

Tronxy X5SA Series Direct drive remix
by Dmill541 is licensed under the Creative Commons - Attribution license.

Tronxy X5SA系列直接驱动混搭版

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

最新模型