夹持叉子夹具（43mm和48mm）

Fork Clamp for vice, 43mm 48mm

2023-06-25 17:51:26

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

夹持叉子夹具（43mm和48mm）

夹持叉子夹具（43mm和48mm）

Summary

Use a regular > 4" vise to hold your forks when servicing them.

I printed with PETG to make sure the spring remains flexible when opening and closing.

Likewise the original design

Consider if it were a solid plastic block: When the fork clamp is compressed in the vice even with a perfect fit on the tube diameter, the pressure will occur mostly right in the middle of the tube hole if the block flexes at all. With an infill (not solid) that flexing will be more pronounced. So my intent was for the 4 holes to be little ridgid cylinders inside, so now when compressed, they compress the least and thus put pressure on 4 quadrants of the fork tube. Hope that makes sense.

Print Settings

Printer brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.20
Infill:
30

Tags

forks garage motorcycle ohlins showa

License

CC BY

Fork Clamp for vice, 43mm 48mm
by renatobo is licensed under the Creative Commons - Attribution license.

夹持叉子夹具（43mm和48mm）

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

最新模型