风车螺旋结构模型

Wind Spinner Spiral Helix Thingy

2023-06-25 17:51:26

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Don't stare at it for too long or you will lose your mind.

Printed in ABS with a 0.6mm nozzle and 0.3 layer height at 150mm/s. Takes about 2.5 hours to print. This is not a spiral vase mode model, just very thin walls.

Has a little hole on the top of the column where you can screw in some sort of anchor for the string or mount or bearing. I used a 1" drywall screw.

IMORTANT: Use a raft to increase bed adhesion. I also used enforced supports for the first 30 layers to increase stability. Other than in that lowest area, supports are not required (see pics).

Print Settings

Printer:
Mercury1 CoreXY
Rafts:
Yes
Supports:
No
Resolution:
0.3
Infill:
Nah
Filament brand:
Hatchbox
Filament material:
ABS

License

CC BY

Wind Spinner Spiral Helix Thingy
by cowtown is licensed under the Creative Commons - Attribution license.

风车螺旋结构模型

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

SATA male THT 15-pin right-angle ATX power connector (3D files, f3d file, and KiCad files included)
2023-08-02
数字世界1234
2024-01-03
斯坦利杯
2024-01-11
GLOCK 17（第三代）蓝枪
2024-04-13
硫化机模型
2024-04-13

最新模型