太阳鱼帆船3D模型
Sunfish Sailboat Model
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Post your MAKES
I made another floating marker, but I made this one so it actually sails too. I used some Sunfish sales catalogues to get the hull lines right.
The sail is deliberately slightly undersized for reasons of weight/balance.
Use a 1/8" (3.5mm) steel rod for the tiller/rudder. You may want PTFE tape to tighten up the tiller fit.
Notes on the Sail
After the sail is printed,
- Remove it, trim, and return it to the print bed.
- Reheat the bed to an annealing temperature. Say 60-70C for PLA
- Take the heated sail and manually deform it into a very gentle airfoil. The corners should be deflected by 2-to-5 mm from their "flat" position.
The airfoil for the sail comes from two factors: the shape, and the fact that the printbed-side of the sail will be smoother than the topside, meaning there will be differential airflow.
Demonstration Video
Tags
License
Sunfish Sailboat Model
by beer2bolts is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
猜你喜欢
联系我们
热门推荐
-
Peugeot 2008 iPhone Magsafe Holder2023-06-19 -
Folding Fan with Dragon year design2024-01-05 -
捉鬼敢死队之普基2024-04-18 -
SnapMaker 2.0 350T 清洁夹具与排气托盘2024-04-21 -
Ender-3电源下部支架2024-04-22
最热下载
-
开源 1:10 四驱竞技型 RC 车2025-07-08 -
替换式膨胀喷嘴，适用于FLEXTAILGEAR小型泵。2024-03-18 -
Dyson V6系列3D模型适配器站2024-04-15 -
线框无心2024-05-08
最新模型
-
原神优菈2025-06-27 -
带耳或不带耳箭尾扣位2024-05-08 -
玛莉德2024-05-08 -
蜂窝灯 ... 简约版2024-05-06 -
Scirocco MK2 离合器踏板回位指南2024-05-06