工作台锯木机高度测量工具
Table Saw height gauge tool
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I designed a simple device to set the height of my table saw.
If used properly it can be quite accurate. But If you want a perfect result you ofc. still need to plane or grind the last few 1/10 mm down per hand.
In addition you will need a M6 x 20 Machinehead screw and a M6 Nut. If you don´t have these you may also print these parts but they might not last a long time if you don´t use a very tough material.
Have fun and keep printin!
Small tipps:
I designed the adjustable part so you can take the height without any measuring.
Check, where you are measuring the Saw teeth and keep the design of them in mind ,-)
Model Wood: You can screw this base to a piece of wood if your table saw is not very plane in the middle (Shit happens). Designed for 4 x M3,5 screws.
Tags
License
Table Saw height gauge tool
by MeisterEdel is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
猜你喜欢
联系我们
热门推荐
-
复古风格闹钟架2023-03-26 -
HP精英台式机800G2微型版 - 内置SSD配置2023-08-03 -
牛逼的3D模型2024-03-26 -
埃文瑞德调音电机旋钮2024-04-15 -
《英雄3》桌游各派系小人模型插入件（Icy设计）2024-04-19
最热下载
-
原始控制舱2024-03-25 -
Woods Mower 30922 护盾保持者2024-04-24 -
幻想磁力2024-05-03 -
线框无心2024-05-08
最新模型
-
Trojan T-28 (2-meter) 软轮胎 3D模型2024-05-08 -
SFF8470连接器2024-05-08 -
简约墙面键帽展示架2024-05-08 -
卡塔琳娜22型船模桅杆门2024-05-08 -
口技演员假人头2024-05-06