便携式工作台夹脚架

Black and Decker Fire Storm Portable Workbench Leg Pin

2024-04-06 05:42:28

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

One of the pins that attaches the legs of the Black and Decker Fire Storm portable workbench to the top of the workbench fell out or broke and was lost. I used one of the three remaining pins to create a replacement model using PrusaSlicer.

I printed with 15% infill, and it seems to hold up well. The pin doesn't take a lot of stress, but if you are concerned, just print with more infill. I tried printing horizontally and vertically, and both work, but the vertical print looks better. If you print it horizontally, use snug supports for the best final print.

Source 3MF file is included if you want to make tweaks, or remove the bumps on the end. The first version I made of this part didn't have the bumps, and it easily fell out. The bumps give it just enough retention to stay in without any issues.