iPhone 11 Halo斯派恩壳
iPhone11 Halo_Spartan Case
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Remix from the Halo Spartan sigil and iPhone 11 case.
Print the Spartan sigil first and then keep the bed hot while loading up the phone case and change out the filament to avoid cooling.
Sliced using Cura and make sure for the case itself, the "z hop" setting is added. Since the sigil layer is 0.4 mm, I set the z hop to 0.6 mm.
Removed the skirt, no support, etc. but I think that may be why all the stringing on the inside of the case.
Used PLA for the sigil and TPU for the case itself.
Print Settings
- Printer brand:
ELEGOO
- Printer:
ELEGOO NEPTUNE 3 Pro
- Rafts:Doesn't Matter
- Supports:Doesn't Matter
- Resolution:Fine
- Infill:100
- Filament brand:
Sainsmart
- Filament color:
Blue
- Filament material:
TPU and PLA
- Notes:
Sliced using Cura and make sure for the case itself, the "z hop" setting is added. Since the sigil layer is 0.4 mm, I set the z hop to 0.6 mm.
Tags
License
iPhone11 Halo_Spartan Case
by GhostOneX is licensed under the Creative Commons - Attribution license.
相关内容
猜你喜欢
联系我们
热门推荐
-
低多边形复古手枪模型2023-06-17 -
577/450剪裁模具2023-08-24 -
BIQU 终结者微型探测器支架2023-09-07 -
小米机器人 XV 型号激光雷达外壳2023-09-08 -
SNZB-04户外箱2024-03-20
最热下载
-
ODCON1 3D打印枪壳（Gun4IR项目，NAMCO GunCon45风格）2023-03-26 -
通用型1/10比例底盘 - DKS基础款2023-03-26 -
Glock 17/34 Solidworks 模型文件2023-04-21 -
索尼NP-FW50电池专用外壳（5个装）2024-04-24 -
HGX lite v2支架2025-07-18
最新模型
-
罗技K400键盘壁挂式支架2025-07-27 -
一体打印活动关节熊猫和支架2025-07-25 -
高跟鞋鞋架2025-07-17 -
碧奇公主；桃子公主；水蜜桃公主2025-07-16 -
关节活动人，假人13,Dummy 132025-07-02