CB无线电天线基座固定装置

CB radio antenna base mount

2023-06-25 23:30:14

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

These mounts are clams to be used with a CB radio antenna base. I made them for my Albrecht Racer antenna, but they may also fit other antennas.

V1

The clam consists of two parts that must be assembled using a 2.5mm nail and an M6 screw and nut. The 2.5mm nail is used as the hinge. The M6 screw and nut are used to create the force to hold the bracket in place.

V2

The bracket has two parts. One part (p1) is the main clamp and the second part (p2 or p3) is a plate that is pushed by an M6 screw to create the force to hold the clamp in place. You will need a screw of the correct length so that it does not interfere with your antenna connector.

Prevent Slipping

To prevent slipping, you need to add self-adhesive protective pads or something else with anti-slip properties. The two parts of the clamp are spaced accordingly.