无线电遥控船壳

RC boat hull

2024-05-06 06:07:18

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

3d printed RC boat hull

has 4 parts, the stand, hull, top cover and TPU seal.
The boat hull is weighted with varying infills that balance out the boat when RC outboard motor attached and boat is in operation.

Plenty of room in hull for electronics that will be needed.
List of electronics/gear used and where to get them:

RC outboard motor:https://www.etsy.com/listing/1611049593/rc-outboard-boat-motor-electric
esc controller:https://www.amazon.com/gp/product/B086LDK6LD
battery:https://www.amazon.com/gp/product/B07P3TGZTF
mini servo:https://www.amazon.com/Compatible-Helicopter-Airplane-Control-Accessories/dp/B0D1BY4SD6
receiver/remote (any with minimum 2 channel):https://www.amazon.com/GA-4H-TX-Transmitter-Controller-Control-Receiver/dp/B0BHS4KHBX

This is a 3d Printed boat hull to pair with a 3d printed outboard motor (available on etsy:https://www.etsy.com/listing/1611049593/rc-outboard-boat-motor-electric)

The hull and motor combo are great for pools and ponds.

Print Settings

Printer brand:
Bambulabs
Printer:
Bambu P1S
Rafts:
No
Supports:
Yes
Infill:
Set in file so boat floats level with outboard motor
Filament brand:
Sunlu
Filament color:
3 color scheme
Filament material:
PLA, TPU
Notes:
The rubber boat seal is printed in TPU. All other parts are printed in PLA.

How I Designed This

Designed in fusion 360 and Bambu Labs Studios.

License

CC BY

RC boat hull
byGadgetsThatGois licensed under theCreative Commons - Attributionlicense.

无线电遥控船壳

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

最新模型