遥控船-喷射泵动力版（大型）

RC Boat - Pump Jet Boat (Large) / 遥控船-喷射泵 (大)

2023-03-26 13:04:25

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

This is a great set of instructions for printing a boat-like device. It's detailed and thorough, covering a wide range of information to help someone successfully print the project. Here's a breakdown of what makes these instructions effective: **Strengths:** * **Material Selection:** Clearly recommends PETG as the primary material with good alternatives (ABS/ASA) for those with proper printing setups. It also advises against PLA due to its lower durability. * **Print Settings:** Provides specific settings for different parts, including nozzle size, layer height, infill, and support configurations. This level of detail is crucial for achieving quality prints. * **Cura Specifics:** Acknowledges potential variations in support generation between Cura versions and suggests checking previews for proper support placement. This addresses a common issue faced by users. * **Part-Specific Instructions:** Each part has its own detailed print settings, highlighting unique requirements (e.g., brims for motor mounts). * **Safety Note:** Warns about potential impeller fracture due to layer adhesion issues, emphasizing the importance of eye protection and caution when using them. **Areas for Improvement:** * **Orientation Information:** While it mentions STL files are already oriented, explicitly stating how parts should be placed on the build plate could be helpful. * **Assembly Guide:** A basic assembly guide or diagram could further enhance these instructions. **Overall Impression:** These instructions are well-written and comprehensive, providing a clear path for someone to successfully print this project. The level of detail is excellent, making it suitable for both beginners and more experienced makers.遥控船-喷射泵动力版（大型）

朋友，你觉得上面这个模型，属于下面的哪个分类？