数字兽人V版宠物牌盒
Digimon V-Pet Deck Box
使用说明
- 所有模型资源均由用户上传分享,内容来源于网络公开资源
- 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
- 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用
我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!
扫码手机访问
抖音私信 @jobsfanSummary
Please consider supporting me by downloading the model from printables or makerworld
A deck box for the digimon card game, designed to look like a v-pet. Three versions are available, one for single sleeved and two for double sleeved decks (one for decks using inner sleeves and one for outer sleeves). All fit 50 card main decks and 4 card egg deck, with a bit of room extra room for a 5th egg or pair of memory counters. The center button can be used as a memory counter, and is held on with a magnet.
Aside from the 3D printed parts, you'll also need:
- 2x Disk magnets (5mm * 1mm)
- Transparent window (58.15mm * 60mm * 1/8 in.)
- A printable alternative for this is also included
For single sleeved decks, print
- 1x Top
- 1x Bottom (43.5mm)
For inner sleeved decks, print
- 1x Top
- 1x Bottom (49mm)
For outer sleeved decks, print
- 1x Top (56mm)
- 1x Bottom (56mm)
For all 3 versions, additionally you'll need to print
- 1x Counter or Counter (embedded)
- 2x Button
- 1x Cage
- 1x Reset button
- 1x Insert or Insert (embedded)
For a full breakdown and assembly instructions, you can check out my video here: https://www.youtube.com/watch?v=6nu2iK-BRxc
Print Settings
- Rafts:No
- Supports:Yes
- Resolution:0.16 (box), 0.2 (trim)
- Notes:
Supports needed for only a small section of the "top" piece. See youtube video for details.
Tags
License
Digimon V-Pet Deck Box
by Finz is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
猜你喜欢
联系我们
最新模型
-
唇膏/润唇膏盒带卡片插槽2024-05-08
-
偏移适配器 for BTT SKR 3 EZ on Ender 5 Plus2024-05-08
-
金属热板收集器2024-05-08
-
宝马E34布罗塞座椅齿轮3D模型2024-05-06
-
鲸鱼玻璃钥匙扣2024-05-06
最热下载
-
星际飞船发射塔与起爆平台(1:144比例)2023-03-26
-
免费蜘蛛侠头像STL模型,适合3D打印2024-03-24
-
原始控制舱2024-03-25
-
罗宾:不公正22024-04-07
-
厨房水槽滤网过滤器2025-06-05