遥控船拖车支撑架

rc boat trailer jack

2023-06-22 21:10:49

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

this is my trailer jack for my traxxas spartan trailer. it uses a 1/2-inch bolt and you will take a half inch nut and put that nut in the spot where the nut sits in the mid-section and glue it in. you will need a pin for the third section. you can cut the first section if need be. the bolt will need 2 nuts when inserted up into you will need a washer on top of the 2 nuts then you insert the part of the bolt up into the top of the jack. now you will need to drill a hole up top of the bolt for a crank. now that the bolt has been inserted in you can add 2 washers and screw down your crank. this will just take the materials laying around to work have fun. the video for this will be on my YouTube channel called Rc vlogs

materials needed.

1/2 inch bold all thread.
1/2-inch nut
super glue
pin of some sort
crank of some sort