大众车身盖板遮阳棚流程优化

VW coverplate awning flow optimized

2023-06-26 02:37:51

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A friend asked me if it would be possible to improve the wind resistance of his VW bus with my 3D printer. The focus here was on the end cap of the awning.
If I had had a 3D scanner, the design process would have been much easier.
So I had to use photos, deskew photos, and jig stencils to create the design in several attempts.
This end cap consists of a flow-optimized main body and an adapter part for mounting. It became apparent that the plastic catches of the original part worked in 3D printing, but did not provide sufficient stability for handling in practice.
So M5 nuts were inserted in the adapter part during printing (Pause_Print in Klipper).
Unfortunately, I had no better screw for the 3rd attachment point than the Phillips wood screw.
The adapter part already fits very well into the main body as a form fit - additionally I glued the part with 2K glue for more security.