可收缩旗杆

Telescoping Flag Pole

2023-06-26 03:37:38

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I wanted to create a way to travel with my flag pole for music festivals but not have it be 10ft one piece. So I designed Telescoping rings that fit onto 1.25"/1"/0.5" PVC pipe and allows each subsequent pipe to be stored inside the other and raised up when needed.

The bottom bolts of each ring hold the ring to the PVC piping. The top rings are what hold the nested PVC pipe in place when raising and lowering.

1.25" PVC = Ring OD-49mm IDBtm-43mm IDTop-34mm.stl
1" PVC = Ring OD-40mm IDBtm-34mm IDTop-22mm.stl
0.5" PVC = Ring OD-28mm IDBtm-22mm IDTop-13mm

The smallest ring was created so that a pole topper could be inserted if desired.

No-Tangle flag rings were created to go with the 1/2" pole size.

For the Telescoping Rings and Flag rings I utilized "NUT JOB" from mike_mattala to make the thumb bolts and nut inserts in the rings.

https://www.thingiverse.com/mike_mattala/designs
https://www.thingiverse.com/thing:193647

The flag clip is a derivative of "S-Carabiner v3" from jnss. I was not a fan of having the indentations only on one side, so I smoothed out the design, otherwise its exactly the same.

https://www.thingiverse.com/jnss/designs
https://www.thingiverse.com/thing:184315

Print Settings

Printer brand:
Creality
Printer:
Ender-3 v2
Rafts:
No
Supports:
Yes
Resolution:
.2mm
Infill:
20%/100%
Filament brand:
Sunlu
Filament color:
White
Filament material:
PLA
Notes:
The Rings were printed at 20% infill. The bolts, because they will be handled a lot, were printed at 100% infill.