商用真空机器到瑞比平面木工工具（P611）

Shop-Vac to Ryobi Planer (P611)

2023-06-26 03:37:38

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This adaptor allows my Shop-Vac to connect to my Ryobi Planer (P611). The bag that comes with the planer is awful and clogs up almost immediately. The adaptor fits on the outside of the planer and to the inside of the Shop-Vac to prevent any material from snagging. There is a ring on the outside to prevent the adaptor from being sucked into the Shop-Vac.

There is an STL file for the exact model I used and an OpenSCAD file with the exact parameters pre-filled for this model if you wanted to adjust it slightly. Shoutout to FollyMaker (https://www.thingiverse.com/FollyMaker) for the fantastic design.