手术刀雕刻柄3D模型

Scalpel Whittling Handle

2023-06-26 03:38:06

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

So a while ago I bought a scalpel to for cutting silicone molds and learned its also great for doing things like making gundams or other kids. However, the handle is not at ALL friendly to grip in a more whittling fashion. So I designed this grip to go over the handle and snap together. I roughly based it off of a whittling handle and gave a slight hexagon shape for sweat to bead into. I did include holes if you want to drill through and bolt or rivet the handle down. There is also an addition you can glue in to push your thumb against but I didn't really see a need for it.

It is a slightly tight fit but you should be able to press the handle in. If not I would suggest heat or if you really need to increase the print size by a few percent at most.

Based on the handle from this listing if you want to compare dimensions to a scalpel handle you may have: https://www.amazon.com/gp/product/B07WTVF64Z/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1