Blender汉密尔顿+海滩夹爪

Blender Hamilton+Beach Clutch

2023-06-26 04:59:23

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

The Hamilton Beach model 53206 blender (obsolete) clutch. The original part tends to break after a while. Main washer is regular steel and can rust. But if you save it, and clean the rust off, print this part and re-insatll the washer.

Print Settings

Printer brand:
Anycubic
Printer:
Large Size Chiron
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
100%
Filament brand:
Your choice
Filament color:
Your choice
Filament material:
PLA, PETG or TPU.
Notes:
I did mine from PLA in white. But TPU is probably going to last longer and have a quieter operation.

Post-Printing

Assembly

To attach the washer, use hot plate set to a melting point of chosen filament. Place firmly washer on the 8 prongs and pres evenly down on the hot plate until the outer edge touches the plate. Let it cool down an install on the blade. (thread is CCW - LEFT).

How I Designed This

My original part broke, I looked over the net to buy one and found it to be obsolete. There are aftermarket options, but the price is too high.
I looked over Thingiverse, found similar part but for different models, so I decided to do a little 3D project of my own. Measured the broken part, modeled it in 3D software a voila.