风扇性能测试平台

Fan Speed Test Tower

2023-06-26 07:03:18

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a calibration tower to find the ideal fan speed for whatever filament you are using or to find an ideal fan speed for a new fan setup you may have installed on your printer by testing its overhang, bridging, and surface quality at different fan speeds. The 50% to 100% tower is best for filaments that generally use higher fan speeds like PLA and the 0%-50% tower is for filaments like PETG that use little to no fan speed while printing. To modify the GCODE in order to change fan speeds mid print, just do the same thing you would in a temp tower but instead of changing the nozzle heat change the fan speed. I recommend watching a temp tower guide video if you don't know how to edit GCODE to make print settings change mid print.

I am aware that the print is a bit bigger than it probably needs to be but I wanted to test the fan speeds affect on the walls of the print a bit more as well but you shouldn't have any issues scaling it down 10% or so in your slicer, just make sure it can still print the bridging and also make sure you set your change fan speed at layer commands AFTER you scale it, otherwise the fan speed will change at the wrong layers if you set the before you scale it.