钳子电池通用模块

Generic caliper battery mod

2023-06-27 17:36:21

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Replace the LR44 with a AAA battery for the Generic caliper. the battery is fiction fit with the bend on the side of the battery compartment.
You will need: wires, tinfoil, some type of glue and a multimeter

Route 2 wires to the slot of the battery cap. Use a dab of glue to secure it in the slots.
Glue a piece of tin foil to the bottom of the cap making sure the tinfoil is making contact with the wire
Slide the cover onto the caliper
Slot the cap into the cover, push it down and rotate anti-clockwise. The prong will hold it in place
Slide the cover out abit and use a tool to pry the side prong towards the cap. then slide the cover back
Route the wire to both end of terminals
Add tinfoils to terminals
optionally add a dab of glue to hold the wire flat and tinfoil down.

PS: There are 3 offset sizes for the battery cap, I use the 0.4mm, but I would recommend 0.5 or 0.6mm. Hot glue is your best friend here, use a flathead to smear the glue will help alot