可调节空气管入口

Adjustable Air Tube Inlet

2023-06-27 17:36:21

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A simple inlet design that can be used for various tubing. You can customize the height, length, and more. The STL should not be rotated or changed because if printed upright, there will be no need of supports. The 45 degree angle of the base and barbs on the inlet allow for them to be naturally supported. This was completed as part of my research experience for undergraduate (REU) program which was sponsored by the National Science Foundation (CNS-2150321).

Print Settings

Printer brand:
UltiMaker
Printer:
Ultimaker S5
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.06mm
Infill:
20%
Filament brand:
Hatchbox
Filament color:
Black
Filament material:
PLA
Notes:
The settings should not matter much. I would print with your default settings, and then adjust from there.

Tags

airstone air inlet aquarium airstone inlet pipe fittings water inlet Water pipe

License

CC BY

Adjustable Air Tube Inlet
by masonwillman is licensed under the Creative Commons - Attribution license.

可调节空气管入口

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

二十一号3D模型
2023-03-26
摇杆开关固定架 - 丰田RAV4 1994-2000 (XA10)
2024-01-09
3D椭圆曲线模型
2025-05-29
Daisy小雏菊开花装饰
2025-06-26
TreX 450抗转动模型 + Matek G474旋翼箱体（旋翼飞行）
2024-04-30

最热下载

ODCON1 3D打印枪壳（Gun4IR项目，NAMCO GunCon45风格）
2023-03-26
通用型1/10比例底盘 - DKS基础款
2023-03-26
尼克公司仿生假手指V3.5.5版
2023-03-26
Dado - 立方体模型
2024-03-24
螺旋锥形手玩具（全新）
2024-05-08

最新模型