C型夹子可调节尺寸，原地打印
C clamp resizable, print in place
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I downloaded couple of c-clamps, but unfortunately were failed prints. The issue is always with the threads. Too tight. I decided to give it a go and design one. I wanted to design simple fast, but working. So, here it is. I designed it using tinker cad in less than half an hour. If you haven't tried tinker cad before, you must. It is easy, free, and straight forward. I used to design in freecad, but it is tiresome, with a long learning curve.
Print Settings
- Rafts:Yes
- Supports:No
- Resolution:0.2
- Infill:100%
- Filament brand:
Sovo
- Filament color:
Yellow
- Filament material:
PLA
- Notes:
I used a raft to better stick. If your bed is well aligned, no need. I resized it to 50% and still it works.
Post-Printing
Just clean and use!
How I Designed This
This is how to create threads easily.
https://www.youtube.com/watch?v=1Osx9BZafJI
相关内容
联系我们
热门推荐
-
星球大战3D棋盘模型：MrBaddeleys国际象棋棋子50%比例展示2023-08-24 -
双重技术差分3D模型2024-01-13 -
Gloomhaven 3D模型插件：按钮和小错误2024-03-30 -
Genmitsu 65mm夹紧器连接到52mm适配器2024-04-08 -
通用型号机器人头部模型2024-05-05
最热下载
-
Valorant 杰特的姿态2023-03-26 -
车身RC 1/10 全套2023-03-26 -
螺旋齿轮玩具3D模型2023-03-26 -
拒绝的手势2024-04-19 -
克利普施 Promedia 2.1音量Pod模拟机器架（铝制支架）安装基座2024-04-29
最新模型
-
适用于Raspberry Pi5的多功能适配器外壳2025-07-27 -
hgx挤出机头火炮响尾蛇 X3 SWX3 HGX lite 2.002025-07-18 -
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24
