18650电池配件套装（适用于Eachine、Fatshark、Skyzone FPVoggles，配备USB-C充电器）

18650 battery case for Eachine, Fatshark, Skyzone FPV goggles with USB-C charger

2023-06-27 17:36:22

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

18650电池配件套装（适用于Eachine、Fatshark、Skyzone FPVoggles，配备USB-C充电器）

Summary

This is just a 3D-printed shell that covers 2x18650 battery container, USB-C charging port for 2S batteries and fits right-sided goggle battery belt place. All electronic parts were ordered at Aliexpress and not expensive.

The set consists of 4 parts:

The base: it has stoppers for 2x18650 container, slot for 2A mini USB-C charger, mini-window to observe charger status led
The top cover: it keeps charger in proper place
3x4mm white (transparent) component for led window
Cable cover (optional)
Capacity Indicator holder (optional)

I used the following filaments:

ASA (grey): base, top, indicator holder;
PLA (white): 3x4mm for led window
TPU for 5.5x2.1mm 2S cable cover

I used the following components ordered from Aliexpress:

2x18650 container: $1.66
2S 2A USB-C mini-charger $1.82
L-shaped 5.5x2.1mm cable $2.19
2S 7.4V battery indicator $2.02 (optional)
Grand total: $5.67 ($7.69)

July 9, 2023 update:

You can enhance case by 5-level battery capacity indicator from Aliexpress. The holder for indicator has been added to the model. The simplest solution is to drill a hole in original case for wires and attach holder with superglue. The holder is relatively tight, do not put indicator full before you glue the holder to the case surface.

Post-Printing

Polishing ASA surfaces

I used raft as a build plate adhesion type for ASA printing. Using acetone for polishing purposes can help top (cover) and bottom (base) parts look better.