定制化智能电池发射器（AAA、AA、C、9V、18650）

Customized Battery Dispienser (AAA, AA, C, 9V, 18650)

2024-05-04 13:20:01

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is not a terribly useful remix, however, if you happen to need exactly the configuration I do, it has some neat features.

By placing the longest cells in the middle, space was liberated on either side to have internal mounts, allowing for side by side mounts or simply a cleaner installation.

The channels are nominally 26x13.2mm, hopefully allowing 1"x1/2" rectangular tubing to be used as a stake or mounting rail.

Screws are 5mm shank and 9.38mm head diameter, as per prototype.

Notches are aligned with the screw holes, allowing the holder to be used as a marking template for mounting screws.

Unfortunately, some of these features are hardwired (not parametric) and make assumptions on the configuration of cells. It has also not been printed, as it's over a day and 300+ grams of filament. If it's successfully printed and seems interesting, I may make the .scad file more parametric, but given the very narrow window of usefulness, I doubt this is anything more than an interesting curiosity. Uploaded in case anyone else can implement the novel ideas in a generalized and useful way.

Capacity: